IE TP Cord M12-90/RJ45-180 pre-assembled IE Flexible Cable, with 1x M12 plug (X-coded) 90-degree cable outlet; 1x RJ45 plug; 180-degree cable outlet; length 1.5 m.
N-Connect male/male flexible connection cable pre-assembled; length 10 m flexible cable, for example, for the connection to antennas, suitable for IWLAN and mobile radio.
N-Connect/ R-SMA male/male flexible connection cable pre-assembled, length 10 m flexible connecting cable Access point antenna (RCoax and others).
SIMATIC S7-1500, spare part Front door for 70 mm width Power supply 5 units per packing unit
SIMATIC S7-1500, spare part Front door for 35 mm width I/O modules; Consisting of: * Front door (unlasered), * Labeling strips (front) * Wiring diagram, 5 units per packing unit
SIMATIC S7-1500, spare part Front door for 25 mm width I/O modules; Consisting of: * Front door (unlasered), * Labeling strips (front) * Wiring diagram, 5 units per packing unit
SIMATIC S7-1500, spare part Front door for 35 mm width Power supply and PTP CP 5 units per packing unit
key-operated switch for extension units, 22mm, round, plastic, latching, 3 switch positions 1-0-2, 2 NO contacts, with 2 keys (incl. printed-circuit board, contact module)
Front connector module with 4x16 pole IDC connector for digital 32 I/O modules of the S7-1500 Potential supply over Push-in terminal
Front connector module with 4x16 pole IDC connector for analog 40 pole I/O modules of the S7-1500 Potential supply over Infeed element
SIPLUS ET 200SP BU20-P12+A4+0B based on 6ES7193-6BP20-0BB0 with conformal coating, -40…+70 °C, BU type B0, push-in terminals, with 4 AUX terminals, bridged to the left, WxH: 20 mm x 117 mm
FO Standard Cable 50/125, pre-assembled with 2x2 BFOC connectors, length 3.0 m.
MM FO Cord LC/LC; 50/125; pre-assembled with 2x LC full duplex connectors; length 3.0 m.
Indoor Fiber Optic (62.5/125), halogen-free, non-crush and flame-retardant fiber-optic internal cable pre-assembled with 4 BFOC connectors, length 0.5 m.
Front connector module with 1x50 pole IDC connector for digital 32 I/O modules of the S7-1500 Potential supply over Screw terminals
SITOP PSU6200 24 V/1.3 A Stabilized power supply Input: 120 - 230 V AC, (120 - 240 V DC) Output: 24 V DC/1.3 A
LOGO! ICL230 Inrush current limiter Input: 100-240 V AC Output: 100-240 V AC/5 A
PROFIBUS ECOFAST Hybrid Cable, 2xCu 0.64 mm, 4x Cu 1.5 mm2, Cable pre-assembled with ECOFAST plug and socket, trailable, length 0.5 m.
PROFIBUS ECOFAST Hybrid Cable GP, 2xCu 0.64 mm, 4x Cu 1.5 mm2, Cable pre-assembled with ECOFAST plug and socket, trailable, length 0.5 m.
MM FO Cord LC/LC; 50/125; pre-assembled with 2x LC full duplex connectors; length 2.0 m.
spare part USB connection cable for CP 5711 2 M USB cable
IE FC RJ45 modular outlet Base module with power insert Interchangeable insert for 1 x 24 V DC and 1 x 100 Mbit/s interface.
IE FC RJ45 modular outlet Base module with insert 1GE Interchangeable insert for 1 x 1000 Mbit/s interface.
IE FC RJ45 modular outlet Base module with insert 2FE Interchangeable insert for 2 x 100 Mbit/s interface.
Industrial Ethernet FastConnect stripping tool, Stripping tool for fast stripping of the IE FastConnect cables
SIPLUS ET 200SP BU20-P8+A4+0B based on 6ES7193-6BP20-0BF0 with conformal coating, -40…+60 °C, BU type F0, push-in terminals, with 4 AUX terminals, bridged to the left, WxH: 20 mm x 117 mm
SIPLUS ET 200SP BU15-P16+A10+2B based on 6ES7193-6BP20-0BA0 with conformal coating, -40…+70 °C, BU type A0, push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mm x141 mm,
Connecting cable unshielded for SIMATIC S7-1500 between front connector module and Connection module 50x0.14 mm2 with IDC connectors, L = 3.0 m
Connecting cable unshielded for SIMATIC S7-1500 64 I/O between I/O modul X10 or X11 and connection module 32 I/O 0.14 mm2, L = 3.0m, 1 pcs. 40 of 50 pole IDC connector
FO Standard Cable 50/125, pre-assembled with 2x2 BFOC connectors, length 2.0 m.
Plug-in cable 830-1T for PROFIBUS for connection of terminal devices to OLM and OBT Already pre-assembled with 2 D-sub connectors, 9-pole, cable terminated on both ends, 3 m.
IE connecting cable M12 push pull 180 / M12 push pull 180, only for ET200SP BusAdapter, preassembled with IE FC trailing cable GP, M12 plugs (D-coded, push-pull), length 3.0 m.
IE TP Cord M12-180/RJ45-180 pre-assembled IE Flexible Cable with 1x M12 plug (X-coded) 180 degrees cable outlet and 1x RJ45 plug; 180-degree cable outlet; length 2.0 m.
SITOP PSE202U 10A Redundancy module Input/output: 24 V DC suitable for decoupling two SITOP power supplies with maximal per 5 A output current
SIMATIC RF1000 RS232 plug-in cable for RF1000 reader to PC or CPs with D-sub 9-pin plug, 5V via low-voltage plug or USB port using adapter cable 6GT2091-7UH10 length 1.8 m.
SIMATIC RF300 Transponder RF360T EPOXY card, 8 KB FRAM, IP67, -25 to +70 °C, 85x 54x 2.5 mm, Minimum order quantity 10 units.
SIMATIC ET 200SP, digital input module, DI 8x 24VDC High Feature, input type 3 (IEC 61131), Sink input (PNP, active high), packaging unit: 10 pieces, suitable for BU type, A0, color code CC01, input delay: 0,05..20ms; channel diagnosis for: short circuit of sensor supply, wire break, power supply, c
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Feature, input type 3 (IEC 61131), sink input, (PNP, sink input) Packing unit: 1 unit, suitable for BU type A0, color code CC01, input delay 0.05..20 ms; Channel diagnostics for: Encoder power supply short circuit, wire break, supply voltage
PROFIBUS Plastic Fiber Optic, Standard cable with 4 BFOC connectors, length 2 m.
IE TP Cord M12-90/RJ45-180 pre-assembled IE Flexible Cable, with 1x M12 plug (X-coded) 90-degree cable outlet; 1x RJ45 plug; 180-degree cable outlet; length 1 m.
Front connector module with flat ribbon Cable connection for digital 16 I/O modules of the S7-300, Power supply over Spring terminals
Front connector module with flat ribbon Cable connection for analog Modules of the S7-300, Power supply over Spring terminals
Connecting cable unshielded for SIMATIC S7-1500 64 I/O between I/O modul X10 or X11 and connection module 32 I/O 0.14 mm2, L = 2.5m, 1 pcs. 40 of 50 pole IDC connector
Shield plate for connection module Analog 8-bit matches connection modules: 6ES7924-0CC21-0... S7-300 6ES7924-0CC20-0... S7-1500 VPE=4 units
Front connector module with flat ribbon Cable connection for digital 16 I/O modules of the S7-300, Power supply over Screw terminal
SIMATIC RF1000 HID license card transponder RF1100T with single license for HID Proximity, Indala or Keri for SIAMTIC RF1040R and SIMATIC RF1140R reader.
SIMATIC RF, MV plug-in cable, pre-assembled, between RF120C and reader PUR, trailing, length 2 m.
Transponder MDS D522 only for RF200/RF300 Gen2 For screwing into metal, ISO 15693, chip type Fujitsu MB89R112, 8192 bytes FRAM user memory 20x 6 mm(DxH); M20x 1 thread minimum order quantity 5 units.
transponder MDS D528 for RF200/RF300 Gen2, screw transponder M8 long, ISO 15693, chip type FUJITSU MB89R112, 8192-byte FRAM user memory 24x 20 mm (DxH); SW22; Minimum order quantity 5 units.
ANT794-4MR mobil iletişim anteni şunlar için: 2G/3G/4G AB, GSM/UMTS/ LTE AB ağları, çubuk anten; çift yönlü; şunun için hava koşullarına dayanıklı: iç ve dış alan; 5m bağlantı kablosu, antene sabit şekilde bağlanmıştır; SMA konnektörü; şunlar dahil: montaj köşebendi, cıvatalar, dübel.
MM FO Cord SC/BFOC; 50/125; pre-assembled with 1x SC duplex connector and 1x BFOC plug; length 1.0 m.
MM FO Cord SC/LC; 50/125; pre-assembled with 1x SC duplex connector and 1x LC duplex connector; length 1.0 m.
MM FO cord BFOC/LC; 50/125; pre-assembled with 1x LC duplex plug connector and 2x BFOC connector; length 1.0 m.
MM FO Cord LC/LC; 50/125; pre-assembled with 2x LC Duplex connectors; length 1.0 m.
IE Connecting Cable M12-90/M12-90, pre-assembled IE FC Trailing Cable GP, with 2 M12 connectors (D-coded) Length 10.0 m.
MM FO Cord SC/SC; 50/125; pre-assembled with 2x SC duplex connectors; length 1.0 m.
SIMATIC RF1000 desktop and wall box for all access control readers of the RF1000 family;
MOBY plug-in cable for Wide-range power supply units 6GT2494-0AA00, 6GT2898-0AA00, 6GT2898-0AA10, 6GT2898-0AA20, 24 V DC; PUR, length 5 m.
Front connector module with 1x50 pole IDC connector for analog 40 pole I/O modules of the S7-1500 Potential supply over Infeed element
Select your language
No account yet?